Plant safety, constant product quality, process optimization, environmental protection and energy conservation are some of the reasons why flow measurements are becoming increasingly important in industrial instrumentation.

Atom-Drive caters measurements for your air consumption needs, knowing the efficiency of your compressed air system means saving cost and increasing productivity.

S430 Pitot Tube Flow/Consumption Sensor
S430 is based on the pitot tube principle to measure flow. Properly installed (refer to instruction manual for details) the sensor can measure in wet and dirty gases as occurring, for example, at the discharge of a compressor. The sensor features long term stability, wide turn-down ratio and good temperature stability. It can be used […]
S450 Heavy Duty Industry Flow/Consumption Sensor
The flow sensor S450 is based on the thermal mass flow principle. It measure volumetric standard flow over a wide measuring range. The result is pressure and temperature independent. S450 is designed specifically for harsh environments. The enclosure with IP67 allows all-weather applications, all parts which come into contact with the measurement medium are made […]
S320 Multi Channel Display
The S320 is a cost effective display that can measure & display (Flow, Consumption, Dew point, Pressure, Temperature, Power consumption, Compressor status etc.) in a compressed air system. S320 includes a USB port for communication interfaces & 2 alarm ray outputs. Specification: Product Type S320 Multi Channel Display Power Supply 100 – 240 VAC 50 […]
S331 Multi Channel Display Data Logger
The universal display and data logger that can measure, display and record all relevant parameters (Flow, Consumption, Dew point, Pressure, Temperature, Power consumption, Compressor status etc.) in a compressed air system. S331 is very powerful yet cost effective new data logger and display solution. The high resolution 5″ graphic display allows an easy operation where […]
S110 Power Meter
The Power Meters are designed for easy installation and high accuracy. It measures the actual power consumption in kW and accumulates the Energy consumption in kWh of a 3-phase load. Additionally, other measured parameters such as current, voltage, cos, phi etc. are available as well. Through 3 clamp sensors the current is sensed. Hat rail, […]
Current Sensor Miniflex 1000
Miniflex 1000 current clamp sensor is an AC RMS current sensor composed of a flexible active part (Rogowski coil model) connected to a compact digital converter, capable of measuring the current carried on a power conductor up to a value of 1000 A ac. The digital converter supplies an output of 4-20 mA DC in […]