| |
|
|
|
General Purpose
Pumps in cast iron, for clean, non-abrasive liquids. The simple and compact construction makes it a low-cost pump, often used in modified versions by OEM customers.
A close-coupled OEM model is also available (see picture below). GP pumps are designed for use with IEC or NEMA flange motors.
Available with 90° angular configuration.
| Capacity Range: |
Up to 50 m3/h / 225 gpm |
| Speed: |
Up to 1750 rpm |
| Differential Pressure: |
Up to 16 bar / 250 psi |
| Suction Lift: |
Up to 0.5 bar / 15" Hg vacuum while priming
Up to 0.8 bar / 24" Hg vacuum while pumping |
| Viscosity Range: |
Up to 7500 cSt |
| Temperature: |
Up to 150°C / 300° F |
|
| |
|
|
| |
HD - Heavy Duty
Pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps are specifically designed for difficult applications and those involving high viscosity liquids.
HD pumps are known by their sturdy and simple construction.
Available with 90° angular configuration.
| Capacity Range: |
Up to 170 m3/h / 750 gpm |
| Speed: |
Up to 1750 rpm |
| Differential Pressure: |
Up to 16 bar / 250 psi |
| Suction Lift: |
Up to 0.5 bar / 15" Hg vacuum while priming
Up to 0.8 bar / 24" Hg vacuum while pumping |
| Viscosity Range: |
Up to 250,000 cSt |
| Temperature: |
Up to 250°C / 500° F |
|
| |
|
|
| |
PD - Petrochemical Duty
PD pumps are designed for refinery and petrochemical applications, all pressure-containing components are carbon steel. Design pressure according to ANSI 300 Lbs or Pn40.
PD pumps are available to meet API 676 standards with exceptions.
Available with 90° angular configuration.
| Capacity Range: |
Up to 170 m3/h / 750 gpm |
| Speed: |
Up to 1750 rpm |
| Differential Pressure: |
Up to 16 bar / 250 psi |
| Suction Lift: |
Up to 0.5 bar / 15" Hg vacuum while priming
Up to 0.8 bar / 24" Hg vacuum while pumping |
| Viscosity Range: |
Up to 250,000 cSt |
| Temperature: |
Up to 250°C / 500° F |
|
| |
|
|
| |
CD - Chemical Duty
Pumps in stainless steel, designed to handle corrosive liquids.
CD pumps are designed for handling corrosive liquids, primarily found in the chemical processing, food and pharmaceutical industries.
Available with 90° angular configuration.
| Capacity Range: |
Up to 170 m3/h / 750 gpm |
| Speed: |
Up to 1750 rpm |
| Differential Pressure: |
Up to 16 bar / 250 psi |
| Suction Lift: |
Up to 0.5 bar / 15" Hg vacuum while priming
Up to 0.8 bar / 24" Hg vacuum while pumping |
| Viscosity Range: |
Up to 250,000 cSt |
| Temperature: |
Up to 250°C / 500° F |
|
| |
|
|
| |
ED - Environmental Duty
Magnetically coupled pumps for ultimate protection against leakage.
As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with traditionally sealed pumps, especially where the application requires the use of double mechanical shaft seals. Often these applications are very arduous resulting in the seals and support system requiring regular attention and/or replacement. Thus, the life cycle costs for ED pumps are generally much lower than for pumps using two seals.
Available with 90° angular configuration.
| Materials: |
Cast iron, carbon steel or stainless steel |
| Capacity Range: |
Up to 90 m3/h / 400 gpm |
| Speed: |
Up to 1750 rpm |
| Differential Pressure: |
Up to 16 bar / 250 psi |
| Suction Lift: |
Up to 0.5 bar / 15" Hg vacuum while priming
Up to 0.8 bar / 24" Hg vacuum while pumping |
| Viscosity Range: |
Up to 10,000 cSt |
| Temperature: |
Up to 250°C / 500° F |
|
| |
|
|
| |
CC - Close-Coupled
Close-coupled pumps in cast iron, designed for the refrigerator industry. CC pumps are available from size 27 up to size 42.
| Capacity Range: |
Up to 6 m3/h |
| Speed: |
Up to 1750 rpm |
| Differential Pressure: |
Up to 5 bar |
| Suction Lift: |
Up to 0.5 bar / 15" Hg vacuum while priming
Up to 0.8 bar / 24" Hg vacuum while pumping |
| Viscosity Range: |
Up to 200 cSt |
| Temperature: |
Up to 120°C / 240° F |
|
|
|
|
