MAGNETIC DRIVE CENTRIFUGAL PUMPS

A pair of magnets controls the operation of the pump, the external magnet placed on the motor transmits motion to the magnet inside the impeller joint sealed off. The impeller of the pump is not 'physically linked to the crankshaft, and gaskets are removed and therefore the losses caused by the liquid pumped wear. The pumping unit and 'built with a low number of components, making it extremely easy maintenance. The materials used are a series of polypropylene (PP) and Polyvinylidenefluoride (PVDF).
The pumps can not run dry. Dirty fluids can reduce the duration.
Working temperature: 80 ° C max PP - PVDF / ECTFE max 90 ° C.

Applications
Our pumps are successfully to a wide range of applications: laboratory technician, medical equipment, machines for developing photographic processes x-ray, silver recovery systems, graphics, heat exchangers, aquariums, water treatment plants filtration, chemical industry, electroplating industry.

Main advantages

- Run in PP, PVDF, ECTFE;

- Use suction;

- No welds;

- Capacities: 32 to 1000 l / min.;

- Unmatched ease of maintenance;

- Low cost of spare parts;

- No fluid leaks;