VOLUMETRIC FLOW - METERS
The flow meter, flow meters, flow meters or volumetric wheel oval AM series to obtain measurements accurate, high repeatability, even very viscous liquid, up to 1,000,000 cps.
Ease of use, compactness, possibility of independent power supply by batteries make these products suitable for installation on fixed lines and fluid transfer and distribution, both for mobile applications such as valves and accessories guns distribution for any other industrial application control fluid provided.
Applications
In the food industry for:
Pulp & juice, glucose, glucose syrup, melted butter, Yogurt, cooking oil, sauces, Mayonnaise, Alcoholic beverages, Mustard, Wine, Must, Milk, Olive oil, seed oil, tomato sauce, beer, etc..
In the chemical industry for:
Colle, Glycerine, emulsifying wax, detergent, photographic processing fluids, industrial inks, polyelectrolytes, Ammonia, Caustic Soda-acetone-Butane, soap, oil, acids, solvents, paints business, car paint, heavy oils, Kerosene, Oil , oil, Freon, Grease, Paints, Stucco
Cosmetics and pharmaceutical industry for:
Creams, shampoo, liquid soap, cleansing milk, Balsamo, Mouthwash, Alcohol, toothpaste, gels, perfumes, syrups, glycerine, glucose solution, Water, Vaseline
Marine industry for:
Heavy oils, Kerosene, Oil
Features
• Range up to 1200 lpm
• Liquid temperature up to 120 ° C
• pressure up to 55 BAR
• Suitable for low viscous liquids and high viscosity (up to 1,000,000 cps)
• High accuracy: + / -0.5%
• Repeatability: 0.03%
• High frictional resistance
• Few worn components
• Flowmeter standard Hall Effect or Reed Switch
• All M-Series flow meters are ISO / IEC 17025:1999
• All M-Series flow meters are CE
• All M-series flow meters have specific ratio calibration
• next-generation digital display that can be installed on both the flow meter or remotely, with:
Ability to preset the amount controlled by a phase
Ability to preset the amount controlled two-step or pulse output
Possible analog output 4-20 mA
Can be connected to a computer with 4 wires or cables RS232/RS485-2 / TTL & Communication Protocol Modbus ASCII / RTU
Selection screen units: ml, L, m3, GAL, U.S. GAL, kg, lb, bbl
Screen with light for night operation
Figures of 17 millimeters
• ATEX: II 1 GD EEx ia IIB / IIC T4 T 100 ° C
• EC - Certificate KEMA 03 ATEX 1074 X
Operation
Within the body of the gauge are housed two oval gear wheels located at 90 ° between them, driven by the flow by turning in opposition and in any gear two magnets that are inserted, coupled with the external sensor (or reed-type effect hall), transmit a signal pulse.
One of them can be replaced by an analog signal directly integrated into the electronic card. The frequency of pulses determines the instantaneous flow because each cycle corresponds to a volume of passage known.
